An appropriate rim tape must completely and securely cover all spoke holes (fig. 1).
Observe any rotation direction markings on the tire sidewall.
Fit one side of the tire onto the rim.
Slightly inflate the tube until it is round.
Fit the valve through the valve hole in the rim.
Place the tube into the tire (fig. 2).
Never use sharp fitting tools (fig. 3).
Starting opposite the valve mount the other tire side onto the rim.
Ensure the tube is not pinched between the rim and the tire (fig. 4).
The valve should be in an upright position (fig. 5).
Center the tire before inflating it to the required pressure.
Adjust the inflation pressure using a pressure gauge, e.g. the Schwalbe Airmax Pro pressure gauge. The permitted inflation pressure range is marked on the tire sidewall.
Check the tire pressure at least once per month with an air gauge (fig. 6).
